Projects

Project Description

For this project, our task was to install a water softener on the east side of this home, the problem was, The pressure valve was right at the end, so we could not install there, on the east side of the house were huge trees whose roots had started to grow toward the house. And the Electric meter for the home was too close to the purposed install area, So if we were going to install this system in this area, we had to go almost 20 feet away from P.O.E…

The Challenge in Installation of Filter

The Roots from the tree had grown so close to the home that it took nearly 5 hours to dig a 18 foot trance, our challenge was to dig away from the electrical and all of the other utility lines that was in the way. As you can see from the pictures, lines were everywhere, this means it had to be done with hands, in order not to nip any of the pipes.

“I had no clue it take so much work to install a water softener, I am sure glad I called you guys.”

James Vega, Client

The Final Taste of Water

Finally we got the lines connected, system flushed, and time for a water test.

In closing, some installs are very easy and straight forward, while some can be a pain in the you know where, this is what we do and love.

We hope you enjoyed a snippet of what it may take to get your system installed.

Main Meter
Locate POE line
Trench the lines
System Installed
Completed install
3 units preparing for install. Resort 1
3 units preparing for install. Resort 2
3 units preparing for install. Resort 3

Commercial Water treatment

Here are a few of our projects, From a restaurant to a resort, they needed a water solution and we gave them the right solution. Here are a few pictures, just to give an idea of what we have done. The first few pictures are a high end resort that wanted a soft water solution for their guess. This was a massive undertaking, but it was nothing for our Soft Water Techs.

Resturant 1
Resturant 2
resturant 3

Commercial Water treatment

Here are a few of our projects, From a restaurant to a resort, they needed a water solution and we gave them the right solution. Here are a few pictures, just to give an idea of what we have done. The first few pictures are a high end resort that wanted a soft water solution for their guess. This was a massive undertaking, but it was nothing for our Soft Water Techs.

Fleck 5600 rebuild and rebed.
Green sand filter front view
Rear View
Unit leaking water on one side
Bypass view

Project Description

This Service call turn major overhaul, so this unit has been leaking for atleast a year, and the customer had no idea, we were called out and this is what we found. Get this though we were called out to perform a service call because of lack of pressure in the home. We arrived checked both pieces of equipment and found both units needed to be service. As you can see these units are in very bad shape, after consulting with the client, they opted to get both units rebuilt, which was possible.

The Challenge in Maintenance of Filter

Resin typically last around 3 to 5 years depending on the quality of water and the amounts of chlorine present during the usage, so its very important to complete preventative maintenance on the equipment, results could be, fouled resin, channeling inside of the tank, and again depending on the quality of water unit may need to be rebuilt often, in the care of high chlorine, high iron or lots of sulfur. (Rotten egg smell)

Unfortunately, this is the case for both of these units, We rebuilt the both valves, Sanitize both tanks and completed a rebed on the softener.

My Tech was very professional and very knowledgeable about both my units, I was completely impressed.

Gwen Davis, Client

The Final Test.

This customer was so appreciative and supportive, it was my pleasure to serve and go the distance. We were able to complete the job, test the water and made sure everything was operating in like new condition. Another, successful job, with another happy client.